FPGA engineer job description (2023)

fpga engineerwork description

These Verilog modules provide "standard" interface functionality for communication, as well as specialized functionality that allows for corner case testing and fault injection.

Realize full lifecycle development and VHDL integration across different FPGA families

Design and development of digital signal processing algorithms in FPGAs

Implementation on Xilinx devices (STA, design optimization for time closure)

Working on a proof of concept project

Assistance in POC performance tests

Develop electrical hardware and software designs that meet various engineering, financial, geometric, and other design constraints through a combination of modeling, simulation, prototyping, testing, and analysis.

He works on FPGA firmware and software architecture to extend the team's existing product capabilities to meet key market and application needs.

Write and review drafts/verification documents

Design, implement and verify IP FPGA modules

2+ years of hands-on experience and solid knowledge of EDA FPGA synthesis, debugging and partitioning tools: Synplify, Chipscope, Certus, Protolink,Identify

Understanding of low power design and verification methodology and flows

Hands-on experience with RTL simulation toolflows (VCS, NCSIM, etc.)

Experience working in an agile S/W development group with knowledge of SW quality standards and processes

3+ years of experience with wireless communication systems and standards, including LTE (FDD/TDD) and UMTS

Solid knowledge of industry standard communication interfaces and protocols such as PCI, PCIe, DDR2/DDR3, I2S, SPI, I2C, UART, Ethernet

Our company is looking for an FPGA engineer. Thank you for taking the time to review the list of qualifications and apply for the position. If you do not meet all the requirements, you may still be considered, depending on your level of experience.

FPGA Engineer Responsibilities

• Lead a small team of designers in creating FPGA design solutions
• Simulate the FPGA to verify performance, then integrate and test the FPGA on the PCB assembly
• Work closely with software, RF, and hardware engineers
• Provide FPGA effort estimates to support bid and proposal efforts as needed
• Responsible for the design and development of new "System-on-FPGA" products, supporting existing products
• Support for map design, prototyping, and debugging
• Years of experience developing standard commercial FPGA code tightly integrated into hardware
• Proven experience developing firmware architecture and code for systems that implement sophisticated wireless or signal processing algorithms in a software-defined radio
• Deep understanding of wireless hardware
• Proven ability to work well in a team and manage key relationships internally and externally.

FPGA Engineer Qualification

• Familiar with video protocol and data format like MIPI, SDI, HDMI, DP, VGA
• Ability to work independently and collaboratively in team environments.
• At least 2 years of hands-on engineering experience designing, integrating, or debugging hardware with digital content
• Experience in laboratory debugging techniques (proficiency with oscilloscopes, logic analyzers, spectrum analyzers, signal generators)
• Strong knowledge of FPGA tool flows
• Experience with high gate count FPGAs is required

Our innovative and growing company is seeking an FPGA Engineer position. To join our growing team, please review the list of responsibilities and qualifications.

FPGA Engineer Responsibilities

• To do this, you have set up all the necessary debugging infrastructure, the connection to the debugger, the waveform, and the execution trace extraction mechanisms.
• If necessary, you will work closely with the CPU design team to identify the root cause of any issues that arise.
• Detailed and complete documentation of the implemented modules
• Daily cooperation with SW and FPGA teams from all over the world
• Work closely with RF and SW teams for design and integration, debugging, and test/validation
• Development of high quality demonstration systems for the global commercialization of our products
• Specification and design of complex FPGA images
• Maintains revision control of the FPGA version code base
• Working knowledge of SoC-based FPGAs with MC-DMA and AXI connection for high-speed data processing
• Find and implement corrective actions for failed RTL tests

FPGA Engineer Qualification

• Experience with IP core integration into FPGA is required
• Experience with desired high-speed communication interfaces
• Desirable experience with microprocessors embedded in FPGAs
• Familiarity with Xilinx development tools (ISE Design Suite, Vivado Design Suite and System Generator for DSP) desirable
• Practical experience in the laboratory is fundamental and necessary
• Desirable knowledge of MATLAB and Simulink (HDL Coder)

Our company is growing rapidly and is looking for an FPGA Engineer. Thank you for taking the time to review the list of qualifications and apply for the position. If you do not meet all the requirements, you may still be considered, depending on your level of experience.

FPGA Engineer Responsibilities

• Provide expert-level technical support to resolve component-level issues
• Communicating with your customers primarily through the web interface, email, and phone, it is your responsibility to investigate issues at the component level and resolve them directly through proper use of simulation and other analysis tools or by working with the components appropriate and solve the evaluation of the plates.
• Prototyping and optimization of hardware components
• Expected participation in developer-led integration of software baselines
• Independent and motivated worker who fits into a small problem-solving team.
• Lead hardware discussions and collaborative efforts with other hardware teams and organizations.
• Adhere to recognized development standards, including writing unit tests, participating in peer reviews, conducting design reviews, and creating test plans to ensure maximum code stability and quality.
• Development of embedded advanced measurement system firmware for substations with special focus on FPGA coding
• Development of advanced firmware solutions for critical substation monitoring and diagnostic needs
• Project execution and leadership experience working across multiple organizations, including clients.

FPGA Engineer Qualification

• Interface protocols (PCIe, USB, Ethernet)
• Ability to run scripts (eg.
• Experience working with electronic instruments, Labview
• Design, development, testing, and implementation of FPGA-based embedded systems, including video systems and advanced driver assistance systems
• Implement advanced video processing algorithms and optimize efficiency
• Static timing analysis, I/O planning, behavior simulation, and on-target verification

Our growing company is hiring an FPGA Engineer. Please review the list of responsibilities and qualifications. While this is our ideal shortlist, we will consider candidates who may not necessarily be fully qualified but have sufficient experience and talent.

FPGA Engineer Responsibilities

• Embedded systems, hardware design, digital logic design, and various hardware architectures
• Design and implement FPGA solutions to support next-generation DRAM and flash test instruments
• Transform abstract concepts and customer requirements into reliable, extensible, and compliant designs
• Assist in the maintenance and expansion of existing FPGA designs to support quality improvements and new customer requirements.
• Meet deadline commitments and deliver quality final products
• Supports the generation of technical products through the use of appropriate standards, processes, procedures and tools throughout the development life cycle.
• Leads research and data analysis, e.g. B. Design proposals, specifications and customer manuals to determine the feasibility of the project or application
• Contributes to the technical approach of small proposals
• Design, write, implement, modify, verify, and evaluate FPGA designs
• Meet the Competitors of the Lattice FPGA Architecture

FPGA Engineer Qualification

• Document the theory of operation and user interfaces.
• This engineer reports to a senior engineer in the electrical design department.
• Experience in designing analog circuits or power supplies.
• Strong knowledge of FPGA or other configurable hardware is required
• An understanding of digital signal processing is required, with a preferred focus on image signal processing pipelines.
• With knowledge of the following FPGA or other configurable hardware designs, PCB layout and schematic assembly, VHDL or Verilog, hard or soft core RISC processors, Altera NIOS II is preferred

Our innovative and growing company is looking for an FPGA Engineer. Please review the list of responsibilities and qualifications. While this is our ideal shortlist, we will consider candidates who may not necessarily be fully qualified but have sufficient experience and talent.

FPGA Engineer Responsibilities

• Can identify factors affecting potential implementation
• You can document the function.
• RTL project for FPGA (Altera/Xilinx)
• Design high-speed data paths and storage elements in multi-clock environments
• Knowledge of scripting languages ​​such as Python or Perl
• Design, implementation, maintenance and improvement of our integrated hardware and firmware platforms for our OE and X-ray spectrometers
• Document your work and share knowledge with the team
• Stay up to date with the latest technologies and methods.
• Development of test bench and simulation tools to verify the correct functionality of the logic
• Design, simulation, implementation and verification of FPGA

FPGA Engineer Qualification

• FPGA development with VHDL and Verilog for high-end devices
• Knowledge of VHDL and/or Verilog and practical experience in developing FPGA projects
• Experience working with Altera Quartus or Xilinx ISE or equivalent design software, analog or digital simulation, C/C++, hardware driver development is preferred
• Thorough knowledge of HD/UHD video processing, PCIe, ISP (image signal processing) preferred
• Extensive knowledge of device-to-device communication protocols, HL7 corrector, DICOM images, PACS, NIOS II, Quartus, Altera, Xilinx, Windows, Linux, JIRA, SVN, DisplayPort, DVI, HDMI, UART, I2C, SPI, PCIe, Controllers PostScript printer drivers, Wi-Fi networking, Bluetooth, object-oriented programming, agile programming techniques, Python, XML, shell scripts, Makefile, remote device updates are preferred
• Knowledge of minimally invasive surgery (MIS) imaging using rigid or flexible endoscope illumination sources such as halogen, xenon, and LED is preferred